BLP250-100 - BOOT LACE PIN GREY 100PK - WIRE SIZE 2.5MM2 18MM - CABAC FS2 The wiring between the matrix

The wiring between the matrix and the wall panel should be performed by using standard UTP CAT5 cabling which transfers both the control and audio signals to the matrix while providing the power supply for the wall panel

5mm socket to 6

andwrapped in a tough exterior

HARDWARE FEATURES Interface 1 × 10/100M Ethernet Port (RJ45) Plug Type EU

Rated voltage/current:DC5V/&lE

BLP250-100 - BOOT LACE PIN GREY 100PK - WIRE SIZE 2.5MM2 18MM - CABAC FS2 The wiring between the matrixBOOT LACE PINS CABAC bootlace pins are used to terminate conductors, by containing the strands in a thin walled copper sleeve that is crimped onto the conductor. The sleeve ensures that no conductor strands stray, and also stops screws in the terminal from breaking strands. The sleeves should be slipped over the stripped conductor, and crimped. Crimp is only to hold sleeve on conductor until screw of terminal housing makes connection. Please Note: