Schwenk 31400501 Indicating plug Gauge OD Range 160.1-170 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Clearance In this special case because

In this special case because of too sparse measurement points the laser will not notice the change in the shape of the guide rail – the measured distance between beams will not change

Knife edge square: 50 x 75With round depth rod

Certification not included but UKAS Certification can be supplied at extra charge

25% full scale

Testing stand

Schwenk 31400501 Indicating plug Gauge OD Range 160.1-170 mm mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version Clearance In this special case becauseApplication For quick comparison measurements of bores during series inspections. The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore. Execution Cemented carbide measuring contacts and measuring needles (wear resistant) Plug gauge from dia. 130 mm can be supplied as a cross shaped sleeves or cross shaped sleeves with skids Version for blind holes with reduced face size Advantage Easy to use Minimum measuring