5/16 #18 Taper Tap Bit Sample Product Large Maxi-Loc Head stops when

Large Maxi-Loc Head stops when it hits the bottom of the hole

If you are using set screws

They work much the same way as the EZ load anchors

Needle sharp point minimizes walking

we prefer a Taper Tap Bit 5/16 Inch #18

5/16 #18 Taper Tap Bit Sample Product Large Maxi-Loc Head stops whenOnce we have drilled the initial hole, we then need a tapping bit. We can use a Bottoming Tap, a Plug Tap or a Taper Tap. For our use, we prefer a Taper Tap Bit 5 16 Inch #18. These taps narrow a bit at the tip, therefore they can be inserted easier into the hole we drilled earlier. WHAT'S INCLUDED Each unit comes with: 1 x Taper tap bit 5 16 inch #18